All of our headers are available in kit form, same price.
These products are for racing and off-road applications. NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
Picture
1967-1969 Camaro
Picture
1927 T

Chevy Drag

 S-10 Chevy Truck Forward Exit V-8 Conversion Headers

For S-10 conversion to a small block Chevy, Exits front lower fender, May have to modify steering shaft.
5/16" Flange, 16 ga. primaries, excellent spark plug access.
From front bolt hole to inside of tubes pointing out is 8"
More room for a wider radiator. (30" between headers)
More steering shaft clearance.

1st Generation 1982-1993
2nd Generation 1994-2004
Picture
STEERING SHAFT CLEARANCE
Picture
EXITS FRONT LOWER FENDER
G - Body Forward Exit
1973 - 1988 Chevy Malibu, Monte Carlo, 
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Clears side and rear engine mounts. Will fit straight or angle plug heads.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
5/16 FLANGE
CERAMIC COATING ADD $350.00
Camaro Forward Exit
1982-1992

For Camaro conversion to a small block Chevy, Exits front lower fender, May have to modify steering shaft.
5/16" Flange, 16 ga. primaries, excellent spark plug access.
More steering shaft clearance.
Preformed Lap Joint
Exhaust Clamps
Preformed band with step provides fast, accurate installation
Chevy Street Rod
 9'' OUT FROM HEAD
30'' FROM FRONT HEADER BOLT TO END OF COLLECTOR
Picture
1055HBSP
Fits 1967 - 1969 Camaro/Nova
Fits Motor in stock location, straight plug heads, stock clutch linkage.

BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
5/16 FLANGE
CERAMIC COATING ADD $350.00

SHOWN WITH STANDARD CHEVY FLANGE
These products are intended for racing and off-road applications. Not legal for sale or use in the state of California, nor in states which have adopted California emission standards. NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
Picture
116/116V
1973 - 1988 Chevy Malibu, Monte Carlo, 
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Also Camaro 70 - 81.
Clears side and rear engine mounts. Will fit straight or angle plug heads.
  Will not fit stock manual clutch linkage ball or air-condition box. Must use short oil filter. 
Oil Filters Such As - Wix 51069 - AC PF24
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Picture
185 / 186
Schoenfeld Headers are not legal for sale or use on any pollution controlled motor vehicle.
Camaro 70 - 81 ¤ Monte Carlo 72 - 77 ¤ Nova 75 - 79
Will not fit Chevelle
Conventional Style Headers for Cars with Engine in Stock Location or engine set back.
Clears side and rear engine mounts.         
Will fit  straight and angle plug heads. Must use short oil filter.

BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Picture
165A / 166A
Schoenfeld Headers are not legal for sale or use on any pollution controlled motor vehicle.
Stock Clip Header
Fender Exit
The all new Schoenfeld stock clip header was designed to eliminate clearance problems encountered with chassis style headers on 70-81 camaros and 78-82 metric clip cars.  The over the frame style header which exits out at mid-fender fits the stock firewall and upper A-frames with the engine in the factory location.  Gone are starter, oil pan, oil filter, spark-plug and ground clearance problems.  Both headers are available in straight diameter and stepped configuration.  

  Must use stock height front springs.

BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
New! Camaro Stock Clip
SHOWN WITH STANDARD CHEVY FLANGE
Picture
FRONT VIEW 104
Picture
TOP VIEW
Click pic for dimensions
New! Metric Stock Clip
Also Fits 1964-1967 Malibu
CM2 = 602 CRATE MOTOR / EQ HEAD
SHOWN WITH STANDARD CHEVY FLANGE
Picture
FRONT VIEW 108
Picture
LEFT SIDE TOP VIEW
Click pic for dimensions
Stock Clip Header

Fits straight or angle plug heads
Exits over frame rail. (Both sides)
Will not fit with stock firewall.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Picture
155 - 156
Click pic for dimensions
Stock Clip Header Fox Body Mustang
 
Exits over frame rail. (Both sides)
Front fenders
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Stock Clip Header Fox Body Mustang
 
Exits over frame rail. (Both sides)
Front fenders
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint

 Chevy Truck Fender Well

5/16" Flange, 16 ga. primaries, excellent spark plug access.
Exits over steering shaft and frame.
Fits 4 Wheel Drive.
Fits straight or angle plug.
Will not fit 1967-1987 with stock heater box. or manual clutch linkage
Clears 38" tires
Fits 1978 -1988 K-5 Blazer
1978 - 1989 C-20 2 Wheel Drive
BOLTS AND GASKETS INCLUDED

Temporary non-high temperature paint
For Off-Road Use Only
HOME
PRODUCTS
Schoenfeld Headers
605 S. 40th
Van Buren, AR. 72956
PH. 479-474-7529
FAX 479-474-2249
115
115V
115V-3
116
116-3
116V
186SP
186VSP
186V18
187SP
187-18
107
107CM
107V-3
107VCM-3
107V
107VCM
108-3
108CM-3
108
108CM
108V
108VCM
109
184V
185
185CM
185V
185VCM
186-3
186CM-3
186
186CM
186V
186VCM
187

1615
1615V
1615SP
1615S
1615-18
1615VSP
1615VS
1615V18
157 157SP 157-18
165A
165ACM
165VA
165VACM
165V3A
165V3ACM
166A
166ACM
166A-3
166ACM-3
166VA
166VACM
167A
105
166VASP
166VA18
167ASP
107
107CM
107V-3
107VCM-3
107V
107VCM
108-3
108CM-3
108
108CM
108V
108VCM
109
155
155V
155VCM
155V-3
155VCM-3
156
156CM
156-3
156V
156VCM

167A18
103
103CM
103V-3
103VCM-3
103V
103VCM
104-3
104CM-3
104
104CM
104V
104VCM