All of our headers are available in kit form, same price.
These products are for racing and off-road applications. NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
S-10 Chevy Truck Forward Exit V-8 Conversion Headers
For S-10 conversion to a small block Chevy, Exits front lower fender, May have to modify steering shaft.
5/16" Flange, 16 ga. primaries, excellent spark plug access.
From front bolt hole to inside of tubes pointing out is 8"
More room for a wider radiator . (30" between headers)
More steering shaft clearance.
1st Generation 1982-1993
5/16" Flange, 16 ga. primaries, excellent spark plug access.
From front bolt hole to inside of tubes pointing out is 8"
More room for a wider radiator . (30" between headers)
More steering shaft clearance.
1st Generation 1982-1993
2nd Generation 1994-2004
|
|
30" From inside of headers (For Radiator)
STEERING SHAFT CLEARANCE
|
EXITS FRONT LOWER FENDER
|
Chevy Truck Pulling Fender Well
5/16" Flange, 16 ga. primaries, excellent spark plug access.
Exits over steering shaft and frame.
Fits 4 Wheel Drive.
Fits straight or angle plug.
Will not fit 1967-1987 with stock heater box. or manual clutch linkage
Clears 38" tires
Fits 1978 -1988 K-5 Blazer
1978 - 1989 C-20 2 Wheel Drive
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
|
|
Preformed Lap Joint
Exhaust Clamps
Exhaust Clamps
Preformed band with step provides fast, accurate installation
Chevy Truck Merge
Available in custom offset Add $150.00 Evacuation tubes exit inside of header
With evacuation tubes add $50.00
5/16" Flange & 16 ga. primaries
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
With evacuation tubes add $50.00
5/16" Flange & 16 ga. primaries
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
1515M
Chevy Truck Pulling
Available in custom offset Add $150.00 Evacuation tubes exit inside of header
With evacuation tubes add $50.00
5/16" Flange & 16 ga. primaries
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
With evacuation tubes add $50.00
5/16" Flange & 16 ga. primaries
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
1514 / 1515
Available in custom offset Add $150.00
Evacuation tubes exit inside of header
Will fit with power brake booster
5/16" Flange & 16 ga. primaries
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
1534 / 1535
1988-1999 Chevy Truck
5/16" Flange, 16 ga. primaries, excellent spark plug access.
Fits straight or angle plug.
Must use short oil filter.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Fits straight or angle plug.
Must use short oil filter.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
|
|
1967-1987 Chevy Truck
Will not fit 1988 and newer.
5/16" Flange, 16 ga. primaries, excellent spark plug access.
Fits 4 Wheel Drive 1978-1987
Fits straight or angle plug.
Must use short oil filter.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Will not fit 1988 and newer.
5/16" Flange, 16 ga. primaries, excellent spark plug access.
Fits 4 Wheel Drive 1978-1987
Fits straight or angle plug.
Must use short oil filter.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
For Off-Road Use Only
Schoenfeld Headers
605 S. 40th
Van Buren, AR. 72956
PH. 479-474-7529
FAX 479-474-2249
605 S. 40th
Van Buren, AR. 72956
PH. 479-474-7529
FAX 479-474-2249
|
1512
1514 1515 1512-E 1514-E 1515-E 1514SP 1515SP 1307 1308-3 1309-3 1309 |
115321515sp
1534 1535 1532-ECCC 1534 -E 1535-E 1534SP 1535SP 1578 1346 198A 198VA 198VASP 198ASP 198A18 198VA18 199VA18 199VASP 1--VA 1346-3 1346V 1346V-3 1398 1398VA |