All of our headers are available in kit form, same price.
These products are for racing and off-road applications. NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
Chevy Street Stock-Stock Clip
IMCA - USRA Hobby Stock
Fits G-Body, 70-81 Camaro
5/16” flange, 16ga primaries, 2" - 2 1/4" 16ga reducers included, excellent spark plug access.
Some plugs may require a 90° spark plug boot.
IMCA Legal - 1485-20 , 1485CM2-22
USRA Legal - 1485-22 , 1485CM2-22
We advise using exhaust hangers to support the systems.
Reducers
2030 , 2230 Are used to attach elbow to muffler
3020 , 3022 Are used to attach header to elbow
Stock Car
Fits B & B 2020 and newer, Bigg Johnson, Cadillac, IROC, Jet, Medieval, Outcast
No clearance issues with oil filter, spark plugs, starter, kick out oil pan, rear mounts, valve cover.
Fits B & B 2020 and newer, Bigg Johnson, Cadillac, IROC, Jet, Medieval, Outcast
No clearance issues with oil filter, spark plugs, starter, kick out oil pan, rear mounts, valve cover.
IMCA-UMP
Stock Car
No clearance issues with oil filter, spark plugs, starter, kick out oil pan, rear mounts, valve cover.
Clears firewall that is minimum 7" from back of block.
Exits inside frame rail.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Stock Car
No clearance issues with oil filter, spark plugs, starter, kick out oil pan, rear mounts, valve cover.
Clears firewall that is minimum 7" from back of block.
Exits inside frame rail.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
80 degree elbow available - part # 3081
No clearance issues with oil filter, spark plugs, starter, kick out oil pan, rear mounts, valve cover.
Clears firewall that is minimum 7" from back of block. From head to outside of collector is 20".
Exits outside frame rail.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Clears firewall that is minimum 7" from back of block. From head to outside of collector is 20".
Exits outside frame rail.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Street Stock
1973 - 1988 Chevy Malibu, Monte Carlo,
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Camaro 70 - 81.
Clears side and rear engine mounts. Motor must be in stock location. Will Fit straight or angle plug heads.
Will not clear stock manual clutch linkage ball or air-condition box.
Will not fit with some mini starters with 168 tooth flywheel.
Must use short oil filter. Oil Filters Such As - Wix 51069 - AC PF24
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
1973 - 1988 Chevy Malibu, Monte Carlo,
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Camaro 70 - 81.
Clears side and rear engine mounts. Motor must be in stock location. Will Fit straight or angle plug heads.
Will not clear stock manual clutch linkage ball or air-condition box.
Will not fit with some mini starters with 168 tooth flywheel.
Must use short oil filter. Oil Filters Such As - Wix 51069 - AC PF24
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
1973 - 1988 Chevy Malibu, Monte Carlo,
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Also Camaro 70 - 81.
Clears side and rear engine mounts. Will Fit straight or angle plug heads.
Will clear stock manual clutch linkage ball. Must use short oil filter. Will not clear air-condition box.
Will not fit with some mini starters with 168 tooth flywheel.
BOLTS AND GASKETS INCLUDED
CM2 = 602 CRATE MOTOR / EQ HEAD
Temporary non-high temperature paint
Pontiac Grand Prix, Olds Cutlass, Buick Regal.
Also Camaro 70 - 81.
Clears side and rear engine mounts. Will Fit straight or angle plug heads.
Will clear stock manual clutch linkage ball. Must use short oil filter. Will not clear air-condition box.
Will not fit with some mini starters with 168 tooth flywheel.
BOLTS AND GASKETS INCLUDED
CM2 = 602 CRATE MOTOR / EQ HEAD
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Street Stock
Camaro 70 - 81 ¤ Monte Carlo 72 - 77 ¤ Nova 75 - 79
Will not fit Chevelle Conventional Style Headers for Cars with Engine in Stock Location or engine set back.
Clears side and rear engine mounts.
Will fit straight and angle plug heads. Must use short oil filter.
BOLTS AND GASKETS INCLUDED
CM2 = 602 CRATE MOTOR / EQ HEAD
Temporary non-high temperature paint
Camaro 70 - 81 ¤ Monte Carlo 72 - 77 ¤ Nova 75 - 79
Will not fit Chevelle Conventional Style Headers for Cars with Engine in Stock Location or engine set back.
Clears side and rear engine mounts.
Will fit straight and angle plug heads. Must use short oil filter.
BOLTS AND GASKETS INCLUDED
CM2 = 602 CRATE MOTOR / EQ HEAD
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Camaro 70 - 81, Impala 65 - 68
Chevelle 64 - 77, Monte Carlo 72 - 77, Nova 75 - 79
Conventional Style Headers for Car with Engines in Stock Location or engine set back.
Will not fit angle plug heads.
Will not clear rear engine mounts.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Chevelle 64 - 77, Monte Carlo 72 - 77, Nova 75 - 79
Conventional Style Headers for Car with Engines in Stock Location or engine set back.
Will not fit angle plug heads.
Will not clear rear engine mounts.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Street Stock Tri Y
Camaro 70 - 81 ¤ Monte Carlo 72 - 77 ¤ Nova 75 - 79
Will not fit Chevelle
4 - 7 Swap Not Available
BOLTS AND GASKETS INCLUDED
*Available Spread Port & 18 deg. add $60.00
Temporary non-high temperature paint
Camaro 70 - 81 ¤ Monte Carlo 72 - 77 ¤ Nova 75 - 79
Will not fit Chevelle
4 - 7 Swap Not Available
BOLTS AND GASKETS INCLUDED
*Available Spread Port & 18 deg. add $60.00
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Stock Clip Header
Fender Exit
The all new Schoenfeld stock clip header was designed to eliminate clearance problems encountered with chassis style headers on 70-81 camaros and 78-87 metric clip cars. The over the frame style header which exits out at mid-fender fits the stock firewall and upper A-frames with the engine in the factory location. Gone are starter, oil pan, oil filter, spark-plug and ground clearance problems. Both headers are available in straight diameter and stepped configuration.
Must use stock height front springs.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Fits 1970-1980 Camaro Stock Clip
Fits 1977-1990 Caprice - B- Body Style
Fender Exit
The all new Schoenfeld stock clip header was designed to eliminate clearance problems encountered with chassis style headers on 70-81 camaros and 78-87 metric clip cars. The over the frame style header which exits out at mid-fender fits the stock firewall and upper A-frames with the engine in the factory location. Gone are starter, oil pan, oil filter, spark-plug and ground clearance problems. Both headers are available in straight diameter and stepped configuration.
Must use stock height front springs.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Fits 1970-1980 Camaro Stock Clip
Fits 1977-1990 Caprice - B- Body Style
SHOWN WITH STANDARD CHEVY FLANGE
Click pic for dimensions
1978-1988 Metric Stock Clip (G-Body Style)
Fits 1964-1967 Malibu
Fits 1964-1967 Malibu
CM2 = 602 CRATE MOTOR / EQ HEAD
SPREAD PORT & 18° AVAILABLE
SHOWN WITH STANDARD CHEVY FLANGE
Temporary non-high temperature paint
SPREAD PORT & 18° AVAILABLE
SHOWN WITH STANDARD CHEVY FLANGE
Temporary non-high temperature paint
Click pic for dimensions
Stock Clip Header Long Tube Design
Fits straight or angle plug heads
Exits over frame rail. (Both sides)
Will not fit with stock firewall.
L/S from head to inside of coll. 18"
R/S from head to inside coll. 14"
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Click pic for dimensions
Fits straight or angle plug heads
Exits over frame rail. (Both sides)
Will not fit with stock firewall.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Exits over frame rail. (Both sides)
Will not fit with stock firewall.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Click pic for dimensions
Fits straight or angle plug heads
Also available for spread port heads - ADD $60.00
Exits over frame rail. (Both sides)
Will not fit with stock firewall.
Fits 2016 & newer Walter Newman chassis, Johnny Rocket.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Also available for spread port heads - ADD $60.00
Exits over frame rail. (Both sides)
Will not fit with stock firewall.
Fits 2016 & newer Walter Newman chassis, Johnny Rocket.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
Click pic for dimensions
Fits straight or angle plug heads
Also available for spread port heads - ADD $70.00
Exits over frame rail. (Both sides)
Will not fit with stock firewall or stock A-frame.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
Also available for spread port heads - ADD $70.00
Exits over frame rail. (Both sides)
Will not fit with stock firewall or stock A-frame.
BOLTS AND GASKETS INCLUDED
Temporary non-high temperature paint
SHOWN WITH STANDARD CHEVY FLANGE
For Off-Road Use Only
Schoenfeld Headers
605 S. 40th
Van Buren, AR. 72956
PH. 479-474-7529
FAX 479-474-2249
605 S. 40th
Van Buren, AR. 72956
PH. 479-474-7529
FAX 479-474-2249
115
115V 115V-3 116 116-3 116V 186SP 186VSP 186V18 187SP 187-18 107 107CM 107V-3 107VCM-3 107V 107VCM 108-3 108CM-3 108 108CM 108V 108VCM 109 |
184V
185 185CM 185V 185VCM 186-3 186CM-3 186 186CM 186V 186VCM 187 155 155V 155VCM 155V-3 155VCM-3 156 156CM 156-3 156VCM |
157SP 157-18
|
165A
165ACM 165VA 165VACM 165V3A 165V3ACM 166A 166ACM 166A-3 166ACM-3 166VA 166VACM 167A 184VM 185M 185MCM 185VM 185VMCM 186M 186MCM 186M-3 186MCM-3 186VM 186VMCM 187M |
105
|
166VASP
166VA18 167ASP 167A18 103 103CM 103V-3 103VCM-3 103V 103VCM 104-3 104CM-3 104 104CM 104V 104VCM 165VAY 166VAY |
121
121V 121V-3 122 122-3 122V 125 125V 125V-3 126 126-3 126V 165 165V 165V3 166 166-3 |