All of our headers are available in kit form, same price.
These products are for racing and off-road applications. NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
NEW!!!
NEW!!!
S-10 Chevy Truck Forward Exit LS1 Conversion Headers
For S-10 conversion to a LS1 Chevy, Exits front lower fender, May have to modify steering shaft.
5/16" Flange, 16 ga. primaries, excellent spark plug access.
More steering shaft clearance.

1st Generation 1982-1993
Picture
TOP VIEW
Picture
STEERING SHAFT
Picture
COLLECTOR EXIT

Chevy LS1-LS7 Truck

CHEVY LS1-LS7 
1967-1999 OBS TRUCK
Fits 1963-1987 4 wheel drive Chevy truck
May have to relocate O2 Bung
Fits 1969-1972 Chevy K5 Blazer
Fits K10 Chevy Blazer 4 wheel drive

Will not fit 1988-1999 4 wheel drive Chevy truck
Temporary non-high temperature paint

5/16” flange, 16ga primaries, O2 sensor bungs installed in collector, excellent spark plug access.
BOLTS AND GASKETS INCLUDED
Dirty Dingo Mounts
1973-87 2WD Truck
DD-2500C
http://www.dirtydingo.com/shop/product_info.php?cPath=359_362&products_id=1308
 
1973-87 4WD Truck
DD-2585-4
http://www.dirtydingo.com/shop/product_info.php?cPath=359_362&products_id=1369
 
1988-99 2WD Truck
DD-2550C
http://www.dirtydingo.com/shop/product_info.php?cPath=359_362&products_id=1314
 
LEFT SIDE COLLECTOR IS 1 1/2" BELOW TOP AND 10" IN FRONT OF CROSS MEMBER
LEFT SIDE CENTER OF PORT TO BOTTOM OF HEADER - 15 3/4"
LEFT SIDE FROM HEAD TO OUTSIDE OF HEADER - 5"
RIGHT SIDE COLLECTOR EXITS OVER AND 4" IN FRONT OF CROSS MEMBER
RIGHT SIDE CENTER OF PORT TO BOTTOM OF HEADER - 15 1/2
RIGHT SIDE FROM HEAD TO OUTSIDE OF HEADER - 5"

CERAMIC COATING ADD $275.00
Picture
1302LS1
CERAMIC COATED
CHEVY LS1-LS7 
1967-1999 OBS TRUCK
Fits 1963-1987 4 wheel drive Chevy truck
May have to relocate O2 Bung
Fits K10 Chevy Blazer 4 wheel drive

Will not fit 1988-1999 4 wheel drive Chevy truck

5/16” flange, 16ga primaries, O2 sensor bungs installed in collector, excellent spark plug access.
These products are intended for racing and off-road applications. Not legal for sale or use in the state of California, nor in states which have adopted California emission standards. NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
Preformed Lap Joint
Exhaust Clamps
Preformed band with step provides fast, accurate installation
LS1 TRUCK Pulling
Temporary non-high temperature paint
Picture
Represents LS1 Header
For Off-Road Use Only
HOME
PRODUCTS
Schoenfeld Headers
605 S. 40th
Van Buren, AR. 72956
PH. 479-474-7529
FAX 479-474-2249
1302LS1

1302VLS1-3
1303LS1
1303LS1-3

1512LS1

1514LS1
1515LS1
1302LS1-C